Introduction to the Goal Zero Yeti 3000X
The Yeti 3000X. Powering your life at home and on the road with clean, quiet, fume-free power is easier than ever with this large capacity power station. Multiple port options allow you to run everything from power tools and air conditioners, to electric bikes and wood-fired grills. The upgraded AC inverter allows you to confidently run anything you could from a traditional wall outlet. With a 3000 watt lithium ion battery at its core, the Goal Zero Yeti 3000X power station equips you with reliable, portable power for camping, tailgating, off-grid events, workshops, and emergency backup.
Comprehensive Port Options
AC and USB Outputs
The Yeti comes ready to power a wide range of devices with an array of port options, including a fast charging 60 watt USB-C power delivery port, two AC ports, with a powerful 2000 watt AC inverter, allows you to run power-hungry devices and appliances with confidence. Our new inverter size can handle up to 3,500 watt surges from power tools, refrigerators, and air conditioners, making it possible to power anything, anywhere.
Two 2.4 amp USB-A ports, an 18 watt USB-C output, two 6 millimeter 12 volt output ports which pair well with some of our lighting options, a 12 volt car charging port with up to 13 amps of regulated output, and a 30 amp 12 volt regulated APP output. This allows you to power a large 12 volt system from a single port.
Charging Inputs
Another addition to this Yeti is an MPPT charge controller. Users will see a 30% more efficient charge from our line of solar panels. Check our website for recommended solar panel pairings based on your intended use. To charge the Yeti from the face plate, there are two options, an 8 millimeter charging port that can accept up to 120 watts of input, or an Anderson Powerpole Port, capable of accepting 600 watts of input. The maximum input a Yeti 3000 X can accept is 660 watts.
Efficient Charging and Advanced Monitoring
Charging the Yeti 3000X
Included 230 watt wall charger will recharge the Yeti in 14 hours, but the Yeti can be charged in as little as five hours from solar or other fast charging power supplies.
Display and Expandability
Our intuitive LCD display allows you to view your input, output, time to empty and full, and current battery level. For more display features, see your Yeti user guide.
Under the lid, there are additional input and output options, including a 30 amp 12 volt APP output, and an 8 millimeter 120 watt input port. These options allow for a more seamless cord management experience. There's also a module bay designed for our Yeti link system, which optimizes your Yeti for vehicle, home, or battery system integration.
Smart Control and Versatility
Yeti App Integration
In addition, we've expanded the capabilities of the latest Yeti app to include historical power tracking, charging profile options, and more. Easily pair your Yeti by pressing the wireless button and following the in-app instructions. This allows you to check battery level, power in and out, and turn ports on and off, all from the palm of your hand.
With our historical power tracking feature, you are able to view your usage history in an easy-to-read data chart. Within the app, you can also select charging profiles based on your use to optimize your battery life.
Conclusion
Whether you need it on the job site, on the road, or as a home backup, when the grid goes down, you can count on the Yeti 3000X to power your electronics, appliances, CPAPs, and more. For more information, visit goalzero.com, or one of our retailers.
| Feature | Detail |
|---|---|
| Battery Type | 3000 watt lithium ion |
| AC Inverter Output | 2000 watts (pure sine wave) |
| AC Surge Capacity | Up to 3,500 watts |
| USB-C Power Delivery Output | 60 watts (fast charging) |
| USB-A Outputs | Two 2.4 amp ports |
| USB-C Output (Standard) | 18 watts |
| 12V 6mm Outputs | Two ports |
| 12V Car Port Output | Up to 13 amps regulated |
| 12V APP Output (Faceplate) | 30 amps regulated |
| 12V APP Output (Under Lid) | 30 amps |
| 8mm Input Port (Faceplate) | Up to 120 watts |
| Anderson Powerpole Input Port | Up to 600 watts |
| Maximum Input | 660 watts |
| Charge Controller | Integrated MPPT (30% more efficient solar charge) |
| Included Wall Charger | 230 watts |
| Wall Charge Time | 14 hours |
| Solar/Fast Charge Time | As little as 5 hours |
Frequently Asked Questions
Q: What kind of battery does the Goal Zero Yeti 3000X use?
A: The Goal Zero Yeti 3000X is built with a 3000 watt lithium ion battery at its core.
Q: How can I charge the Yeti 3000X, and how long does it take?
A: The Yeti can be charged using the included 230 watt wall charger, which takes 14 hours. For faster charging, it can be charged in as little as five hours from solar panels (with the included MPPT controller for 30% more efficiency) or other fast charging power supplies via the 8 millimeter port (up to 120 watts) or the Anderson Powerpole Port (up to 600 watts). The maximum input the Yeti 3000X can accept is 660 watts.
Q: What advanced features does the Yeti 3000X offer for control and monitoring?
A: The Yeti 3000X features an intuitive LCD display for viewing input, output, time to empty and full, and current battery level. Additionally, it integrates with the Yeti app, allowing users to check battery level, power in and out, and turn ports on and off remotely. The app also includes historical power tracking and charging profile options to optimize battery life. The unit also has a module bay for Yeti link system integration for vehicle, home, or battery system optimization.